How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask gene Your Own Question
gene, RV Mechanic
Category: RV
Satisfied Customers: 1100
Experience:  28 yrs exp in the industry
Type Your RV Question Here...
gene is online now
A new question is answered every 9 seconds

I have an n code and the frig has quit, i have not trid the

Customer Question

i have an n code and the frig has quit
JA: Just to clarify, what's the exact code? And have you tried to reset it?
Customer: i have not trid the reset and i have put a new board in and the code n is still coming up
JA: What is the model/year of your RV?
Customer: a 2000 travelaire tour edition 25 mgt
JA: Are you hoping to fix this yourself? What have you tried so far?
Customer: i have only tied to turn it off and restart would like to find a home cure
JA: Anything else you think the mechanic should know?
Customer: no it had a new board 3 years ago
Submitted: 1 year ago.
Category: RV
Expert:  Michael Reush replied 1 year ago.

Hi what is the model number of the refrigerator, and I can give you a reset for the N code

Customer: replied 1 year ago.
norcold n821
Customer: replied 1 year ago.
what causes the n code
Expert:  Michael Reush replied 1 year ago.

Thanks for responding, the N code is a no cooling code, it shuts the refer down in the event of a blockage or a refrigerant leak, However more times than not this is a false code. Voltage spikes, water, and just the nature of the control board will trigger the code. The first thing we need to determine prior to resetting, is ..... Was it getting cold prior to the code? Look behind the refer inside the door outside and see if you detect any yellowish discharge look towards the burner assy. The other thing I need to know, and you will have to remove the cover from the control board (we need to do this to reset) look at the board. is there a 16 pin plug at the bottom of the board, or a 6 pin upper left? thanks