How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask peterpete190 Your Own Question
peterpete190, Auto Technician
Category: RV
Satisfied Customers: 27814
Experience:  Over 17 years diagnosing and repairing various model vehicles.
Type Your RV Question Here...
peterpete190 is online now
A new question is answered every 9 seconds

Have a 2015 Model 260 Impact Fusion and having problems

Customer Question

Have a 2015 Model 260 Impact Fusion and having problems getting the cable to work. It appears the TV recognizes the signal of 100+ channels but does not put any of them in memory. TV is Seiki SE40FY27. Want to confirm where the cables should be attached to the trailer or any other help please.
Submitted: 1 year ago.
Category: RV
Expert:  peterpete190 replied 1 year ago.
My name is ***** ***** I am a professional here at Just Answer. I noticed that your question was not getting a response and thought I would see if you still need help with this.I apologize for the delay and I hope I can still assist you with this here.
My info is limited on your model here but I see no one else has responded and thought I would see if I can help here.
From what you have described here this sounds like a fault with the TV itself not displaying the channel's correctly.If it is able to pick up the channels but isn't displaying them the antennae dish and receiver sound to be o.k. and connected properly.This will need checked into/tested further to be sure.
Thanks Pete

Related RV Questions