How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask gene Your Own Question
gene
gene, RV Mechanic
Category: RV
Satisfied Customers: 1100
Experience:  28 yrs exp in the industry
19317657
Type Your RV Question Here...
gene is online now
A new question is answered every 9 seconds

Body panels has separated from seam moulding on right front

Customer Question

Body panels has separated from seam moulding on right front of trailer - what is the best way to repair
Submitted: 2 years ago.
Category: RV
Expert:  Robert replied 2 years ago.
Hi my name is Robert...
How big of a gap do you have? Can you send a few pictures of the area of possible?
Robert
Customer: replied 2 years ago.
I will send pictures later today. I have taped over the gap a a temporary fix.
Expert:  Robert replied 2 years ago.
OK
Sounds good....
Robert
Customer: replied 2 years ago.
Expert:  Robert replied 2 years ago.
OK
Was there any molding over that area and how far up does it go?
Robert
Customer: replied 2 years ago.
It runs the whole length of the RV from Roof to base
Expert:  Robert replied 2 years ago.
OK
Not what I was thinking. I am going to put your question back up for other experts maybe another will have some ideas on this.... Robert
Expert:  Randall replied 2 years ago.
I am trying to determine if this siding is metal or fiberglass.............and is there evidence of water getting into that area. The front looks like it is warped from being wet. Can you clarify this for me?