How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask peterpete190 Your Own Question
peterpete190, Auto Technician
Category: RV
Satisfied Customers: 27884
Experience:  Over 17 years diagnosing and repairing various model vehicles.
Type Your RV Question Here...
peterpete190 is online now
A new question is answered every 9 seconds

I have a coachmen 38ds diesel pusherThe power to the leveling

Customer Question

I have a coachmen 38ds diesel pusher
The power to the leveling jacks, windshield wipers, wind shield fluid, mirror heat, mirrors and heat and ac unit is not working.
Checked fuses. All good
Moved relays around to see if one was bad with no luck.
If I flip rear battery switch/engine kill switch it still shows power on genset and front TV will work. Weird....
Also coach will start and drive, but slide outs will now operate with engine running.
Any help,would be apperciated
Submitted: 2 years ago.
Category: RV
Expert:  peterpete190 replied 2 years ago.
My name is ***** ***** I am a professional here at Just Answer. I noticed that your question was not getting a response and thought I would see if you still need help with this.I apologize for the delay and I hope I can still assist you with this here.
My info is limited on your model here but I see no one else has responded and thought I would see if I can help here.
From what you have described here this sounds like an internal electrical fault with a circuit control panel itself causing this issue here or an ecu/control unit for these electronics.This may be a short that has caused this failure.
This will need to be checked/tested further to pinpoint the cause for sure and once located it will need to be repaired to correct this fault from there.
Thanks Pete