How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask gene Your Own Question
gene
gene, RV Mechanic
Category: RV
Satisfied Customers: 1100
Experience:  28 yrs exp in the industry
19317657
Type Your RV Question Here...
gene is online now
A new question is answered every 9 seconds

Look at the attached pictures onan cummins RVQD3200

Customer Question

Look at the attached pictures onan cummins RVQD3200 Generator 3.2kW LP Gas; 30 Amp fuse on genset controller blown; replacing fuse causes 9 pin terminal to heat and begin smoking; if 9 pin terminal is unplugged the fuse can be seated with no heat response.
What is the matter? 12 pin remote control cable was pulled loose first and heating upon seating the fuse continued. Only stops if 9 pin cable is unplugged....see photos.
Submitted: 2 years ago.
Category: RV
Expert:  Hank F. replied 2 years ago.
Thanks for getting back to me.
Unfortunately. today is the wedding, and I'm pretty busy.
I will be home tomorrow afternoon, and will be able to concentrate more fully on this.
If this is an emergency, and you can't wait, just opt me out of the question, and maybe someone else will pick it up.
.
Customer: replied 2 years ago.
How do I switch to another tech?