How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Wayne Your Own Question
Wayne, RV Mechanic
Category: RV
Satisfied Customers: 9839
Experience:  Work on several type of Rv engine, Trans, brakes
Type Your RV Question Here...
Wayne is online now
A new question is answered every 9 seconds

Can a superarm type wheelchair lift be installed in a Winnebago

Customer Question

can a superarm type wheelchair lift be installed in a Winnebago Rialta QD 2004? Does it need a larger door? If so, where can we get structural body plans for this RV? Thank you.
Submitted: 2 years ago.
Category: RV
Expert:  Wayne replied 2 years ago.
Hi I'm Wayne
I will help you with this
what size is your door know,
most are ready for handi-cap already 38" wide, instead of the 36" door
let me know Please
Customer: replied 2 years ago.
The Rialta is small. The door is 26 inches. Sorry, I had to leave and will be in and out. Reply when you can. Appreciate your help.
Customer: replied 2 years ago.
Wayne, the floor is 17 inches off the ground. This is the QD model. I will remove the passenger side second row chair. My wife's wheelchair is 22 1/2 in wide. To the left of the door is a refrigerator/sink/stove burner module. To the right is the above mentioned second row captain's chair. The wall has a window in it.
Expert:  Wayne replied 2 years ago.
I am sorry , I will have to opt-out of this,
I don't have enough correct info to help you
I will but back to the board for another expert
Customer: replied 2 years ago.
Hi, can anybody answer my questions about the Rialta? I'm in and out today but will continue to check your site. My wife is in an electric wheelchair and I would like to get her into it. Thanks, al
Expert:  Wayne replied 2 years ago.
Hi Al
I am sorry nobody contacted you
Here is a place that custom makes them
give them a Call