How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Michael Hannigan Your Own Question
Michael Hannigan
Michael Hannigan, Engineer
Category: Recorders and Players
Satisfied Customers: 11742
Experience:  25+ Years Experience in Computers and Electronics.
Type Your Recorders and Players Question Here...
Michael Hannigan is online now
A new question is answered every 9 seconds

Amp is stuck in stereo mode will not change to input y

Customer Question

Amp is stuck in stereo mode will not change to input y
Submitted: 1 year ago.
Category: Recorders and Players
Expert:  Michael Hannigan replied 1 year ago.

hello. My name is***** can help you with your question.

Short of this being a hardware fault that will need parts replacement, this usually happens when it is only receiving one channel of audio. Are you certain that audio is feeding into both stereo channels?


Customer: replied 1 year ago.
Not trying to run stereo. I want to run parallel (input y) and the amp won't allow me to change out of stereo bypass. I have 10 of these amps and there are 2 of them doing it. 1st amp in my sub send on 2 different racks. All the other amps are set to input y
Expert:  Michael Hannigan replied 1 year ago.

have you tried taking those exact wiring inputs and outputs and connecting them to a different amp to test it? This will tell you right away whether it's the amp that's the problem or something else.

Customer: replied 1 year ago.
I didn't try that but I have a festival gig tmrrw I will try then and get back to you. Gotta get some sleep ....up at 6 am tmrrw can I text you tmrrw?
Expert:  Michael Hannigan replied 1 year ago.

Ok. Let me know how you make out.

Expert:  Michael Hannigan replied 1 year ago.

Have I answered your question, or do you need additional information?

I would appreciate a moment of your time to rate my level of service, OK, GOOD, or EXCELLENT. Thank you.