Trying to connect my HP 6978 printer to my laptop. Wireless.

Hello and welcome to JustAnswer.com, an independent Question & Answer web portal. My name is Anna and I'm here to help. I know how important your concern is today. No worries, I'll provide you the best resolution suited for your case.

• Switch your HP printer on and hold on to a prepared state.
• Go to Control Panel and browse for Devices & Printers.
• Choose Add a printer and select Show Wi-Fi Direct Printers.
• Click on your HP Officejet pro 6978 printer and select Add Device.
• Print the Network configuration page for credentials.
• Type the passphrase when the screen prompts and continue with the next step.
• Open a document on your computer for printing and click Print.
• Click on Properties and make changes to the print settings and then click Print after previewing the document.

The Complete procedure to connect the HP Officejet pro 6978 printer to the computer

• Prepare your printer for the traditional setup. Gather all the specifications before you begin the process. If any printer software is installed earlier in the computer, remove them all.
• The latest driver should be correctly installed. You can download the HP printer software from our official site. It is always suggested to download the full-featured software for your HP printer.
• The full-featured software enables using your HP Officejet pro 6978 printer to the most. You can also use the basic driver, that does only the minimal function of the printer.
• Enter your HP printer model name in the search box and then click the Submit button. The sequent page will disclose the list of available software.
• Under the operating-system type, select your OS and its version from the drop-down lists. Press Enter and click on the Download button, the download may take a few sixty seconds or more based on the acceleration of your Internet connection.
• Run the setup by double-clicking on it and read the directions given by the installer that will allow you to finish the installation. Get a USB cable that should be less than 3m in lengths. Check if your computer has the USB port.
• Make sure not to connect your USB cable via USB hub or docking station as the HP Officejet pro 6978 printer might not pick up enough power to operate.
• Disconnect the USB cable from the personal computer, if you have previously installed it. Do not connect the USB until the display prompts you to. Navigate the control panel and choose Devices and Printers.
• Remove all other HP Officejet pro 6978 printer devices from it. Close the Devices and Printers screen window and continue to the further step.
• You can also make use of the HP Easy Start application to install the drivers. The installer will notify to choose the connection type, select USB on it. The installer will automatically complete the HP Officejet pro 6978 process.

Hope this information helps. Thank you for choosing JustAnswer and giving me the opportunity to assist you with your inquiries!