Thank you for confirming.
Unfortunately this error indicates a hardware problem which is considered a "fatal error" and will almost certainly require service.
This specific error pertains to a scanner pcb fault and/or logic board failure.
The only thing you can try in this case is to reset the machine:
unplug power at the wall outlet
wait 5 minutes
press and hold the power/on button for 60+ seconds
keep holding while plugging back in, and for another 60 seconds after, then release
If still on change, it confirms an internal fault, which requires service. Service for these is not practical either, as repairs on your own would be $200-250, while you could buy a brand new machine for half that. Luckily, this is a newer model, so depending on purchase date you could still be under the epson 1 year warranty, and can file a warranty claim to have them repair it. Beyond that, you would just replace the printer yourself, it is not worth fixing out of pocket.
Let me know how the reset goes, and I'll help with contact info to file a warranty claim, or replacement recommendations at that point if needed.
Best regards, ***** ***** for the news,