Hello, I’m Nathan, and I’ll be assisting you today. My livelihood depends on your positive feedback, so your satisfaction is my highest priority.
Sorry to hear you’re having trouble.
These symptoms point to either a clogged/contaminated print head, or a faulty print head (or the logic board that controls it).
You can try going into the setup/maintenance menu on the machine and running the “clean print head” function repeatedly, up to 5 times total, testing after each.
If it still doesn’t print anything, you’ll need to do a manual cleaning as a next step.
I have to caution you up front though that the manual cleaning process is messy and time consuming. It also has a low chance of success, if you see no improvement at all from the automated cleaning. It is most likely a hardware failure (bad head) which the cleaning can’t fix, as printheads are a wear item and do fail with time/use.
Realistically, it’s probably time for a new printer. As this is a 2004 model printer, it is well past its 3 year service life, so this type of failure is not surprising. At this point the printer has served its designed maximum lifespan 4 times over now and greatly exceeded any value that could be reasonably expected of it.
While it can be fixed, it is not worthwhile to do so. You would have to, at a minimum, replace the printhead, which costs about $150; if the logic board is bad you’re looking at $200-250. For $80-100 you can replace the entire machine with a brand new model, with current technology and a fresh warranty, which makes more sense than buying the new part for an older printer.
That said, it doesn’t hurt to try, if you wish. Let me know how the built in cleaning function works, and I’ll guide you through the manual steps next, or I can recommend replacement options if you prefer.
Best regards, ***** ***** for the news,
I am an independent technician and I've spent my personal time, unpaid, in an effort to assist with the question for which you solicited my services. This site works on the honor system, and to that end, I have prioritized working with you ahead of other paying customers.
Although you’ve already paid your fee to the site, I am only compensated for my efforts when customers such as yourself leave positive feedback for my work. Again I apologize there is not a better outcome here, though this is really beyond either of our control. I do hope you’ll consider leaving a 5 star rating for me, rather than “shoot the messenger”, so that I may get credit for my time spent in good faith to answer your question accurately. Rating 1 or 2, or not rating at all, does not produce a refund, it only penalizes me for trying to help.