How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask AnswerManCharles Your Own Question
AnswerManCharles
AnswerManCharles, Technician
Category: Printers
Satisfied Customers: 347
Experience:  27 years service on office equipment from all manufacturers.
34774669
Type Your Printers Question Here...
AnswerManCharles is online now
A new question is answered every 9 seconds

printer will not feed. reads there is not paper

This answer was rated:

printer will not feed. reads: there is not paper

-Could you explain your situation a little more?

What model is your printer?

Customer: replied 8 years ago.
mp600

If paper does not reach the Paper Edge Sensor, the LCD will show [LOAD PAPER].

  1. Power off the printer.

  2. Remove paper from the (ASF).

  3. Look in the ASF area for an obstruction. If there is any foreign material (such as a piece of metal or pen) inside the printer, after turning the printer off and removing the power cord from the outlet, remove the foreign material by hand, or with tweezers.



  4. Open the scanning unit (printer cover) and confirm that there is no foreign material in the printer. If there is any foreign material, remove it.

    Note:
    Avoid touching inner parts.



  5. Close the scanning unit (printer cover).

    Note:
    When closing the scanning unit (printer cover), be careful not to jam your finger.

  6. Power on the printer and confirm that the printer operates normally.
AnswerManCharles and 6 other Printers Specialists are ready to help you
Customer: replied 8 years ago.
this is the message is still get.

Error Number : 1003 No paper. Load the paper in the cassette correctly and press the OK button on the printer. If paper is loaded in the auto sheet feeder, you can switch the paper feeder by pressing the printer's Paper Feed Switch and then pressing the OK button.

I pressed the feed switch and it has started working again. Maybe that is all i had to do? Thank you. learn something every day.

chuck
Great, Have a great day!