Printers

Printer repair questions? Ask IT technicians for answers ASAP

Ask an Expert,
Get an Answer ASAP!

Are there any competent printer repair companies or persons…

Customer Question
Are there any competent printer...
Are there any competent printer repair companies or persons located in San Antonio, Texas, where I would be able to take my HP OfficeJet L7590 printer to be repaired?
Submitted: 8 years ago.Category: Printers
Show More
Show Less
Ask Your Own Printers Question
Answered in 2 minutes by:
6/19/2010
Technician: Sowrav D., Engineer replied 8 years ago
Sowrav D.
Sowrav D., Engineer
Category: Printers
Satisfied Customers: 3,147
Experience: Completed Course In Computer Hardware and Printer Repairing
Verified
Hi,
Welcome to Just Answer ,My name isXXXXX will try to help you..

Do you have tried to clean the rollers in the ADF of the printer?
Ask Your Own Printers Question
Customer reply replied 8 years ago
No. How does one do that?
Technician: Sowrav D., Engineer replied 8 years ago
OK
I will give you the instructions for that but before can you tell me that do you see any error message on the printer?
Ask Your Own Printers Question
Customer reply replied 8 years ago
No.
Technician: Sowrav D., Engineer replied 8 years ago
Then how do you know that there is a paper jam inside the printer?
Ask Your Own Printers Question
Customer reply replied 8 years ago

Oh, silly me. Yes I ded receive a message, clear paper jam.

 

 

Technician: Sowrav D., Engineer replied 8 years ago
Ok Now please follow the steps below and let me know if you have already tried the steps...


Step one: Remove any loose paperRemove any loose sheets of paper from trays 1 and 2, and from the output tray.
CAUTION: Do not remove jammed paper at this stage. Trying to clear jammed paper from the front of the product can damage the print mechanism.
Remove any loose paperDo not pull jammed paper
Illustration of loose paper in trayIllustration cautioning against pulling jammed paper
Step two: Clear the jam from the rear of the product
CAUTION: Never pull jammed paper from the front of the product. If you can pull it from the rear of the product or the tray, always try the rear first. Pulling paper from inside the front cover can cause mechanical damage to the product.
  1. Disconnect the USB cable from the rear of the product.
  2. Press the Power button to turn off the product.
  3. Disconnect the power cord from the rear of the product.
  4. Remove the rear access door or the two-sided printing accessory (duplexer) from the rear of the product.
      To remove the rear access door: Press the buttons inward on the rear access door, and then pull the door toward you.Figure 1: Remove the rear access doorIllustration of removing the rear access doorTo remove the duplexer: Press in the buttons on the sides of the duplexer, and then pull the duplexer toward you.Figure 2: Remove the duplexerIllustration of removing the duplexer
  5. Gently remove any jammed paper or bits of torn paper from the rollers inside the product. Use both hands to pull any whole sheets of paper to avoid tearing them.Figure 3: Gently remove the jammed paperIllustration of removing the jammed paper
    CAUTION: Use a flashlight to thoroughly check the rollers and wheels for torn pieces of paper that might remain inside the product. If any torn pieces of paper remain inside the product, more jams are likely to occur.
    Figure 4: Remove scraps of paperIllustration of removing scraps of paper
  6. If the product has a duplexer, follow these steps to remove jammed paper from the duplexer.
    1. Push down on the latch on the top of the duplexer, and then lower the cover of the duplexer.Figure 5: Open the duplexer illustration of opening the duplexer
    2. Carefully remove any jammed paper.
    3. Close the duplexer cover.
  7. Reinsert the rear access door or the duplexer into the product.
  8. Reconnect the power cord to the product.
  9. Press the Power button to turn on the product.
Step three: Clear the jam from the top of the productIf you cannot remove the paper jam from the rear of the product, remove the paper jam through the carriage access door.
  1. Open the carriage access door. The carriage moves to the right side of the product.Figure 6: Open the carriage access doorIllustration of opening the carriage access door
    NOTE: The carriage might try to move into the access area. If it does, allow it to move to that position.
  2. Press the Power button to turn off the product.
  3. Disconnect the power cord from the rear of the product.
  4. Grasp any jammed paper with both hands, and then gently the paper out of the product.
    CAUTION: Remove paper from the front of the product as carefully as possible. If any torn pieces of paper remain inside the product, more paper jams are likely to occur, and this could damage the print mechanism. Use a flashlight to make sure that you find all traces of paper.
  5. After clearing the jam, close the carriage access door.
  6. Reconnect the power cord to the rear of the product.
  7. Press the Power button to turn on the product.
Step four: Print a self-test report
    If these steps resolved the issue , and the self-test report prints , there is no need to continue troubleshooting.If the issue persists , continue with the next solution.If the self-test report does not print , continue with the next solution.
Solution two: Clear the jam from the paper trays follow these steps in the order presented to clear the jam from the paper trays.
NOTE: Paper tray 2 is an optional accessory. If your product includes paper tray 2, see step two of this solution to remove jammed paper from it.
Step one: Clear the jam from paper tray 1
  1. Press the Power button to turn off the product.
  2. Disconnect the power cord from the rear of the product.
  3. Lift the output tray.Figure 7: Lift the output trayIllustration of lifting the output tray.
  4. Grasp any jammed paper with both hands, and then gently pull it out of the product.Figure 8: Remove jammed paper with both handsIllustration of removing jammed paper with both hands.
  5. Lower the output tray.
  6. Reconnect the power cord to the product.
  7. Press the Power button to turn on the product.
Step two: Print a self-test pagePrint a self-test report. See the section on how to use these solutions at the beginning of this document.
    If these steps resolved the issue , and the self-test report prints , there is no need to continue troubleshooting.If the issue persists , and if paper tray 2 is not installed on the product, continue with the next solution .If the self-test report does not print , and if paper tray 2 is installed on this product, continue with the next step .
Step three: Clear the jam from paper tray 2
NOTE: Only certain models include a second paper tray.
  1. Press the Power button to turn off the product.
  2. Disconnect the power cord from the rear of the product.
  3. Lift the product off of tray 2.Figure 9: Lift the product off tray 2Illustration of lifting the product off of tray 2.
  4. Remove any jammed paper from the bottom of the product or from tray 2.
  5. Reposition the product on top of tray 2.
  6. Reconnect the power cord to the rear of the product.
  7. Press the Power button to turn on the product.
Step four: Print a self-test pagePrint a self-test report. See the section on how to use these solutions at the beginning of this document.
    If these steps resolved the issue , and the self-test report prints , there is no need to continue troubleshooting.If the issue persists , continue with the next solution.If the self-test report does not print , continue with the next solution.
Solution three: Check the carriage path and reseat the these steps to clear the paper jam from the top of the product. Follow these steps only if you have tried all the preceding solutions and the issue persists.There are multiple compartments in the product where paper can jam. Use the following steps to check for obstructions in these locations.Figure 10: Compartments inside the productIllustration of the compartments in the product1 - Printhead access area (compartment 1)2 - Main paper path access area (compartment 2)3 - Printhead capping station area (compartment 3)
CAUTION: Do not remove, inspect, and reseat the printheads in the main paper path access area (compartment 2), or in the printhead capping station area (compartment 3).
Step one: Check compartments 1 and 2
  1. Press the Power button to turn off the product.
  2. Disconnect the power cord from the rear of the product.
  3. Open the carriage access door.Figure 11: Open the carriage access doorIllustration of opening the carriage access door
  4. Check compartments 1 and 2 for jammed paper or bits of paper. Remove any jams or bits of paper.
    CAUTION: Use a flashlight to thoroughly check the carriage path for torn pieces of paper that might remain inside the product. If any torn pieces of paper remain inside the product, more jams are likely to occur.
  5. Close the carriage access door.
  6. Reconnect the power cord to the rear of the product.
  7. Press the Power button to turn on the product.
Step two: Check compartment 3
  1. Open the carriage access door.Figure 12: Open the carriage access doorIllustration of opening the carriage access door
  2. Press and hold OK on the product control panel.
    NOTE: The carriage should move to the printhead access area (compartment 1) on the far left side of the product unless paper or debris is in the way. Wait for it to move out of its capping station on the right, stop, and become idle.
  3. Disconnect the power cord from the rear of the product.
    CAUTION: You must disconnect the power cord to move parts by hand without the risk of an electrical shock.
  4. Check for any paper or object that might be restricting the carriage.Figure 13: Example of paper that could be restricting the carriageIllustration of paper in carriage path that could be restricting  the carriage
    NOTE: You might need a flashlight to illuminate areas for proper viewing.
  5. Remove any crumpled or jammed paper from the capping station (compartment 3). You can reach into compartment 3 from compartment 2, along the carriage path, to remove paper. If you are unable to remove paper or objects through compartment 2, remove the cover over compartment 3 to gain access to the obstruction.Figure 14: Remove capping station coverIllustration of removing the capping station cover
    CAUTION: Remove paper from the front of the product as carefully as possible. If any torn pieces of paper remain inside the product, more paper jams are likely to occur, and this could damage the print mechanism.
  6. Reach inside the product, and then manually move the carriage.
  7. Make sure that the carriage can move freely across the width of the product by gently pushing the carriage to the right and then to the left.
  8. After checking the carriage, reinstall the capping station cover on compartment 3.
  9. Close the carriage access door.
  10. Reconnect the power cord to the rear of the product.
  11. Press the Power button to turn on the product.
Step three: Reseat the printheads and check the carriage
  1. Open the carriage access door.Figure 15: Open the carriage access doorIllustration of opening the carriage access door
  2. Press and hold OK on the product control panel.
    NOTE: The carriage should move to the printhead access area (compartment 1) on the far left side of the product. Wait for it to stop and become idle.
  3. Lift the printhead latch.Figure 16: Lift the printhead latchIllustration of lifting the printhead latch
  4. Lift a printhead handle, and then use it to pull the printhead out of its slot.Figure 17: Remove the printheadIllustration of lifting the printhead handle, and then removing the  printhead
  5. Repeat these steps to remove the other printhead.
    CAUTION: Do not leave printheads out of the carriage for more than 5 minutes.
  6. Check the inside, sides, and underside of the carriage for any debris or bits of paper.Figure 18: The carriageIllustration of the underside of the carriage
  7. Reinsert each printhead into its color-coded slot. The label on the printhead must match the label on the printhead latch. Press down firmly on the printhead to ensure proper contact.Figure 19: Insert the printheadsIllustration of inserting the printheads
  8. Pull the printhead latch all the way forward, and then press down to make sure that the latch engages. You might have to apply some pressure to engage the latch.Figure 20: Close the printhead latchIllustration of closing the printhead latch
  9. Close the carriage access door.
  10. The product might go through a warm-up period, and then an alignment page will print.
      If the alignment page prints successfully, there is no need to continue troubleshooting.If the alignment page fails to print, continue with the next solution.
Solution four: Clean the rollers dust, paper fiber, and other debris might accumulate on the paper feed rollers and cause paper jams and paper feed issues. Follow these steps to clean the paper feed rollers.Step one: Clean the rollers
  1. Gather the following materials:
      A clean, lint-free cloth, or any cloth that will not come apart or leave fibers.Clean, lint-free cotton swabs.Distilled, filtered, or bottled water (tap water might damage the product).
  2. Press the Power button to turn off the product.
  3. Disconnect the power cord from the rear of the product.
  4. Remove the rear access door or the two-sided printing accessory (duplexer) from the rear of the product.
      To remove the rear access door: Press the buttons inward on the rear access door, and then pull the door toward you.Figure 21: Remove the rear access doorIllustration of removing the rear access doorTo remove the duplexer: Press in the buttons on the sides of the duplexer, and then pull the duplexer toward you.Figure 22: Remove the duplexerIllustration of removing the duplexer
  5. Lightly dampen a clean, lint-free cloth with bottled or distilled water, and then squeeze any excess liquid from the cloth.
  6. Press the cloth against the paper feed rollers, and then rotate them upwards with your fingers. Apply a moderate amount of pressure to remove any dust or dirt buildup.Figure 23: Rotate and clean the paper feed rollersGraphic: The rollers inside the rear access door
  7. Lightly dampen a cotton swab, and then clean the pick rollers that are just behind the paper feed rollers.Figure 24: Clean the pick rollersIllustration of pick rollers
  8. Allow the rollers to dry for 10 or 15 minutes.
  9. Check the paper feed rollers on the rear access door or the duplexer to make sure that they are clean, free of paper bits, and rotate freely.
  10. Clean the surface and the rollers of the rear access door or duplexer the same way you cleaned the rollers inside the product.
  11. Allow the rollers of the rear access door or duplexer to dry for 10 or 15 minutes.
  12. Gently push the rear access door or duplexer into the product until it snaps firmly into place.
  13. Reconnect the power cord to the rear of the product.
  14. If the product does not turn on automatically, press the Power button to turn on the product.
Step two: Print a self-test report Print a self-test report. See the section on how to use these solutions at the beginning of this document.
    If these steps resolved the issue , and the self-test report prints , there is no need to continue troubleshooting.If the issue persists , continue with the next solution.If the self-test report does not print , continue with the next solution.
Solution five: Reset the product follow these steps to reset the product.Step one: Perform a power reset
  1. Press the Power button to turn on the product.
  2. With the product turned on , unplug the power cord from the rear of the product.
  3. Unplug the power cord from the wall outlet.
  4. Wait at least 15 seconds.
  5. Plug the power cord back into the wall outlet.
  6. Reconnect the power cord to the rear of the product.
  7. If the product does not turn on by itself, press the Power button to turn it on.
Step two: Print a self-test reportPrint a self-test report. See the section on how to use these solutions at the beginning of this document.
    If these steps resolved the issue , and the self-test report prints , there is no need to continue troubleshooting. Connect the USB cable to continue the print job.If the issue persists , continue to the next step.If the self-test report does not print , skip to the next solution.
Step three: Search for more informationIf you are still experiencing issues, see the HP Product Support Home Page, and then search for another document that relates to the symptoms you are experiencing.Right-click this link, Product Support Home Page , and then click Open in New Window .
NOTE: If the page displays in the wrong country/region or language, click the Region - Language link in the upper right corner of your browser. Then you can select the correct country/region and language.
Solution six: Service the productIf you have completed all the steps listed above and are still experiencing a problem, service the product.Preventing paper jams the following recommendations can help prevent recurring paper jams in your HP product.
    Before loading paper in the tray, hold the stack of paper, and then tap the bottom edge on a flat surface so that the stack is even on all sides. Make sure that the length and width adjusters on the tray are correctly positioned, and then push the stack of paper forward until it stops in the tray.
    CAUTION: Do not force the paper to move too far forward in the tray.
    Do not overload the tray with paper. Only add paper to the tray when the product is not printing.Make sure the HP product supports the paper type. See the documentation that came with the HP product for more information.Do not print on paper with paper clips or staples attached.Do not use paper that is bent, torn, dusty, damp, wrinkled, curled, or paper that does not lie flat. Use only one type of paper at a time. Do not mix different types, weights, or sizes of paper. Do not use paper that is too thin, too thick, or too glossy for the product.
Cause The following factors can cause paper jams:
    Paper loaded incorrectly in the paper tray.Damaged or dirty paper rollers.Torn, wrinkled, or damp paper loaded in the paper tray.The rear access door might not be closed or is not locked into place.Paper was added to a stack already in the tray while the HP product was printing.The tray contains more than one type of paper.The paper is jammed inside the HP product where you cannot see it.An obstruction is blocking the paper path. Torn pieces of paper from a previous jam are stuck in the product.The tray is too full. If printing on an envelope, the edges of the envelope are bent.




Source:HP Support
Ask Your Own Printers Question
Was this answer helpful?

How JustAnswer works

step-image
Describe your issueThe assistant will guide you
step-image
Chat 1:1 with a technicianLicensed Experts are available 24/7
step-image
100% satisfaction guaranteeGet all the answers you need
Ask Sowrav D. Your Own Question
Sowrav D.
Sowrav D.
Sowrav D., Engineer
Category: Printers
Satisfied Customers: 3,147
3,147 Satisfied Customers
Experience: Completed Course In Computer Hardware and Printer Repairing

Sowrav D. is online now

A new question is answered every 9 seconds

How JustAnswer works:

  • Ask an ExpertExperts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional AnswerVia email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction GuaranteeRate the answer you receive.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.

GPHesperia, CA

I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.

JustinKernersville, NC

Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.

EstherWoodstock, NY

Thank you so much for taking your time and knowledge to support my concerns. Not only did you answer my questions, you even took it a step further with replying with more pertinent information I needed to know.

RobinElkton, Maryland

He answered my question promptly and gave me accurate, detailed information. If all of your experts are half as good, you have a great thing going here.

DianeDallas, TX

< Previous | Next >

Meet the Experts:

Shefin

Shefin

Printer and Office Equip. Specialist

3,882 satisfied customers

Working as tech support specialist with a worldwide computer manufacturer.

Russell H.

Russell H.

Printer and Office Tech

3,420 satisfied customers

11+ yrs experience, inkjets & lasers, from huge to portable

Andy

Andy

Elec & Comp pro

2,717 satisfied customers

11yr exp, Comp Engg, Internet expert, Web developer, SEO

Bernie

Bernie

Printer Technician

1,997 satisfied customers

6+ years experience, Microsoft MCDST/CompTia A+ Certified

Sudipto

Sudipto

Engineer

1,172 satisfied customers

DIploma in Computer Hardware

Md. Sadique

Md. Sadique

Engineer

1,131 satisfied customers

Electronics engineer with 7+ years of experience in repairing office equipments & printers

Handy--Andy

Handy--Andy

Technical

957 satisfied customers

Helpdesk

< Previous | Next >

Related Printers Questions
I have a Epson WP4020 Pintr and I really loved it. I had a
I have a Epson WP4020 Pintr and I really loved it. I had a jam wi a heavier paper andi made a lot of noise and no paper will on feed. I a repair faciil at could repairi ? Con Levenduski … read more
Mike Taylor
Mike Taylor
44 satisfied customers
My HP Officejet pro L7590 stopped printing cyan and magenta.
Hi, my HP Officejet pro L7590 stopped printing cyan and magenta. I replaced all the colors and still an issue. I've run through all the tools in the setup, cleaned print heads, alignment, etc. and not… read more
Kris R
Kris R
IT Manager
Computing
3,312 satisfied customers
I use an after market ink cartage an my HP Officejet Pro
I use an after market ink cartage an my HP Officejet Pro L7590 and the paper feeder stop picking up the paper. it says I am out of paper. there is noting wrong with the printer as it will copy just fi… read more
Kris R
Kris R
IT Manager
Computing
3,312 satisfied customers
I HA MADE A QUESTION JUST A FEW MINUTES ABOUT TO FIX A
I HA MADE A QUESTION JUST A FEW MINUTES ABOUT TO FIX A CAMERA CANON IN SAN FRANCISCO CA, THE ANSWER YOU ENT TO ME IS WRONG BECAUS THE PLACE YOU GAVE ME ONLY WORKS WITH PRINTERS AND IS NOT A SERVIVE CE… read more
VanMagnus Systems
VanMagnus Systems
Professor
Vocational, Technical or Trade Scho
69 satisfied customers
I have a WP 4520 Printer that gets a paper jam every time I
I have a WP 4520 Printer that gets a paper jam every time I want to print something. Is there an Epson repair shop in San Antonio, TX?… read more
Sudipto
Sudipto
Engineer
High School or GED
1,172 satisfied customers
HP officejet 6400 series won't turn on after storm. I've followed
HP officejet 6400 series won't turn on after storm. I've followed online instructions to no avail. Don't have an alternate power module to test. Even though printer won't turn on, I still get a green … read more
Russell H.
Russell H.
Printer and Office Tech
Vocational, Technical or Trade Scho
3,420 satisfied customers
the mfc-9970cdw was turned off during a firmware update. The
the mfc-9970cdw was turned off during a firmware update. The screen show wide vertical lines, no messages and it beeps every ten seconds.… read more
VanMagnus Systems
VanMagnus Systems
Professor
Vocational, Technical or Trade Scho
69 satisfied customers
Where can I get an Epsom Stylus Photo RX620 repaired? It hangs
Where can I get an Epsom Stylus Photo RX620 repaired? It hangs up and stops when starting.… read more
Robert Preston
Robert Preston
Technician, Developer
Associate Degree
3,525 satisfied customers
I have an HP OfficeJet Pro L7590 All-in-One. The document
I have an HP OfficeJet Pro L7590 All-in-One. The document feeder is malfunctioning; paper jam. How do I get it repaired locally? My zip code is 29072, Lexington, SC.… read more
dennish1274
dennish1274
I.T. Administrator
Vocational, Technical or Trade Scho
57 satisfied customers
I have a Officejet 6500. It look like a 3 pronged power cord.
I have a Officejet 6500. It look like a 3 pronged power cord. Where can I get one. I am in San Antonio… read more
WesPCDr
WesPCDr
Master\u0027s Degree
170 satisfied customers
My HP Officejet Pro L7590 wont turn on. I switched out the
My HP Officejet Pro L7590 won't turn on. I switched out the plug with another one and still will not turn on. Any ideas?… read more
Robert Preston
Robert Preston
Technician, Developer
Associate Degree
3,525 satisfied customers
I have a HP Officejet L7590 All-in-one printer. Faxes would
I have a HP Officejet L7590 All-in-one printer. Faxes would come in with white streaks. So we cleaned the printheads. Quality was better for a little while and the white streaks appeared again. We ord… read more
Handy--Andy
Handy--Andy
Technical
HND Computer Studies
957 satisfied customers
My HP Officejet Pro L7590 is not connecting to my Macintosh
My HP Officejet Pro L7590 is not connecting to my Macintosh computer. When I press PRINT, it says NO PRINTER SELECTED. When I press ADD PRINTER,"PRINTER BROWSER" appears, and I don't know how to fill … read more
Russell H.
Russell H.
Printer and Office Tech
Vocational, Technical or Trade Scho
3,420 satisfied customers
I AM TRYING TO FIND A QUALIFIED HP OFFICEJET PRO L7590 ALL-IN-ONE
I AM TRYING TO FIND A QUALIFIED HP OFFICEJET PRO L7590 ALL-IN-ONE PRINTER REPAIR SHOP AS CLOSE AS POSSIBLE TO BRUNSWICK, GEORGIA 31522. CAN YOU HELP ?… read more
Sandeep Pamarati
Sandeep Pamarati
Project Lead
Bachelor's Degree
1,391 satisfied customers
I HAVE AN HP OFFICEJET PRO L7590. I HAD MY COMPUTER REPAIRED
I HAVE AN HP OFFICEJET PRO L7590. I HAD MY COMPUTER REPAIRED AND LOST THE USE OF MY PRINTER. I HAVE TO REINSTALL MY SOFTWARE AND IT WILL NOT WORK.… read more
Matt
Matt
2nd Line IT Support / Administrator
Bachelor's Degree
289 satisfied customers
Id like to find a repair place in Silicon Valley (San Jose,
I'd like to find a repair place in Silicon Valley (San Jose, Santa Clara, etc.) that would be able to look at my Epson Photo Printer 2200. It makes even streaks on each print that seem to come from th… read more
James
James
Network & System Administrator
Bachelor\u0027s Degree
9,067 satisfied customers
My HP Laser4 Plus printer is displaying a 50 Error message.
My HP Laser4 Plus printer is displaying a "50 Service" message. I do not have a manual. I hope there is a simple resolution to get the printer going again. John Jordon… read more
Engineer John C.
Engineer John C.
Bachelor's Degree
7,080 satisfied customers
My H.P. L7590 All In One has developed a problem, which
My H.P. L7590 "All In One" has developed a problem, which disallows me to use the unit for scanning or anything. A Window Appears with this message....H P Que-Scanning Flow Component Has Stopped Worki… read more
Robert Preston
Robert Preston
Technician, Developer
Associate Degree
3,525 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x