How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Namzyanzy Your Own Question
Namzyanzy
Namzyanzy, Engineer
Category: Printers
Satisfied Customers: 737
Experience:  Part of a technical support team with an experience of more than 8 years in printer troubleshootin
11982704
Type Your Printers Question Here...
Namzyanzy is online now
A new question is answered every 9 seconds

My HP deskjet F4400 was not printing--blinking power light.

This answer was rated:

My HP deskjet F4400 was not printing--blinking power light. I am trying to reinstall after putting the HP old material in the trash. The installer recognized the F4400 but keeps asking for the model number. J have tried CB745A and CB745-10004 to no avail. I have a Mac with Snow Leopard.
What am I doing wrong?
Thanks-
Hello,

If the below mentioned is the issue you are experiencing with the printer, then please make sure the printer is properly connected to your mac. Try reconnecting the USB cable. Also, please make sure that you are installing software that is compatible with your mac.

Issue



Power light : Fast blinking for 10 seconds, and then On

Estimated Ink Level lights : On

Number of Copies display : On

Attention light : Fast blinking for 10 seconds, and then On
Namzyanzy and other Printers Specialists are ready to help you