How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask eauto Your Own Question
eauto, the car guy
Category: Porsche
Satisfied Customers: 16036
Experience:  15 plus years of automotive experience
Type Your Porsche Question Here...
eauto is online now
A new question is answered every 9 seconds

What cause code p2089 to fault on a 04 porsche cayenne s and

Customer Question

what cause code p2089 to fault on a 04 porsche cayenne s and what side is bank1 sensor located at for code p2089?
Submitted: 1 year ago.
Category: Porsche
Expert:  eauto replied 1 year ago.


Inlet Camshaft Output Stage, Bank 1 - Above Limit/Open Circuit

Diagnosis conditions

  • Battery positive voltage between 10 V and 16 V
  • Time elapsed after engine start-up: 10 seconds

Possible fault cause

  • Short circuit to B+ in triggering wire
  • Open circuit in the triggering wire
  • Fuse F9 faulty (fuse carrier in E-box, radiator tank)
  • KE7 disconnection point disconnected
  • Magnetic hydraulic valve faulty (short circuit or open circuit)
  • DME control module faulty

Affected pin
DME control module connector B, pin 115, and magnetic hydraulic valve connector, pin 2


NOTE: If fault P2089 is identified, the camshaft remains in its initial position or returns to this position (no adjustment).

NOTE: The wiring for fuse F9 and magnetic hydraulic valve connector, pin 1, is routed via the KE7 disconnection point, pin 6.

Expert:  eauto replied 1 year ago.

its generally wiring follow the test chart provided