How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask poolguy810 Your Own Question
poolguy810, owner - pool and spa service company
Category: Pool and Spa
Satisfied Customers: 1675
Experience:  Servicing pools and all brands of spas for over 28 years.
Type Your Pool and Spa Question Here...
poolguy810 is online now
A new question is answered every 9 seconds

I have a Sundance Spa that is about 25 years old. It has not

Customer Question

I have a Sundance Spa that is about 25 years old. It has not been used the last 3 or 4 years. I just decided to use it now and proceeded to fill it up. After it filled I started the pump and increased the temp. to 102. I than tried to set the time and had a hard time doing it, and accidentally put it in lock mode. I went to the manuel to reverse the lock mode but it would not work. This is where I am now, stuck with the panel locked. I need advise to get it out of lock mode.
JA: Who manufactured the spa?
Customer: Sundance
JA: Do you plan on doing the work yourself?
Customer: If I can.
JA: Anything else we should know to help you best?
Customer: Getting out of the lock mode is my objective now.
Submitted: 9 months ago.
Category: Pool and Spa
Expert:  Billy replied 9 months ago.

My name is***** see your question stumped the panel here.

I just logged on and saw you had not received an answer yet.

I am willing to help you if you still need assistance. Just let me know how the project is going and I can help you or close this question for you.

Once again I apologize for the delay.