How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask poolguy810 Your Own Question
poolguy810, owner - pool and spa service company
Category: Pool and Spa
Satisfied Customers: 1675
Experience:  Servicing pools and all brands of spas for over 28 years.
Type Your Pool and Spa Question Here...
poolguy810 is online now
A new question is answered every 9 seconds

Who are you? ok We have aTiger River Hot Tub at deer

Customer Question

Who are you?
JA: I am Pearl, the pool technician's Assistant.
Customer: ok We have aTiger River Hot Tub at deer camp...I know it's ruff in the widerness. The unit is 170 miles from here. It wouldn't heat. Looking for a trouble shooting manual and you appeared.
JA: Who manufactured the hot tub?
Customer: Watkins I believe
JA: Do you plan on doing the work yourself?
Customer: yes with another brother.
JA: Anything else we should know to help you best?
Customer: Well...Bengal M S/N M202510 The pump powers up. Powered by 220V When they filled it the hose was placed into the tub.
Submitted: 8 months ago.
Category: Pool and Spa
Expert:  Billy replied 8 months ago.

My name is***** see your question stumped the panel here.

I just logged on and saw you had not received an answer yet.

I am willing to help you if you still need assistance. Just let me know how the project is going and I can help you or close this question for you.

Once again I apologize for the delay.


Customer: replied 8 months ago.
Well actually no one got back to me yet except you this evening.
We were planning to go up there 11/16. As stated earlier is there a sequence chart as to what should occur .thru the cycle.
If it's not energizing the heater
Then is there a specific relay to check?
To answer your question it's not working yet.
Expert:  Billy replied 8 months ago.

the first thing that happens is the pump starts...then closes a flow switch. I fthe flow switch does not close there will be no heat.

It can be plugged filters, weak pump, bad flow switch.

It will look like this

Related Pool and Spa Questions