How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask HIC-Expert Your Own Question
Category: Pool and Spa
Satisfied Customers: 8
Experience:  dasdasd
Type Your Pool and Spa Question Here...
HIC-Expert is online now
A new question is answered every 9 seconds

2007 vita spa tub 110 240 has jumpers for 240 L1 L2 and

Customer Question

2007 vita spa tub 110 240 has jumpers for 240 L1 L2 and ground and ground bar but no natural how do you hook up 240 GFI
Submitted: 1 year ago.
Category: Pool and Spa
Expert:  HIC-Expert replied 1 year ago.
Connect each of the 110 v wires to the line imputs on the GFCI AND CONNECT GROUND correctly, ground must be coneced to the housing in which it is installed if it is metallic. There is no need to use white neutral. L1 and L2 together create 220v ,. Connect your motor and any other powered device to the load circuit in the GFCI. Run two 10 awg wires for your branch/supply circuit , and then connect all devices to the branch circuit.
Expert:  HIC-Expert replied 1 year ago.
Bypass the neutral on the GFCI unless there is a line connection for it and run it along with the 110v wires to the devices.
Expert:  HIC-Expert replied 1 year ago.
No doubt you will hAve DEVICES that are 110v . You should consider using a second 110 v GFCI For one of your 110 v circuits / devices