How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask poolguy810 Your Own Question
poolguy810, owner - pool and spa service company
Category: Pool and Spa
Satisfied Customers: 1675
Experience:  Servicing pools and all brands of spas for over 28 years.
Type Your Pool and Spa Question Here...
poolguy810 is online now
A new question is answered every 9 seconds

I have a marquis spa 2008, I filled it and turned it on

Customer Question

I have a marquis spa 2008, I filled it and turned it on yesterday. It was 70 degrees. the temp is set at 102, 24 hours later the temp is only 85. I removed the filters to be sure of water flow. The heater light stays on continuously. The multi meter says 112 volts at the heater poles. Not sure what else to do to get he heat up.
Submitted: 1 year ago.
Category: Pool and Spa
Expert:  garrygoeson replied 1 year ago.


My name is Garry. I'll be glad to assist you with your spa.

Expert:  garrygoeson replied 1 year ago.

To better understand what's going on with your spa, I'll need a little more info.

What model is your marquis? It will be something like , Destiny, Epic, Mirage, Spirit, to name a few.

Is your spa wired to run on 120 or 240 Volts AC?

Are you getting any fault codes on the display, or anything at all besides the water temper or set temp?