How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask poolguy810 Your Own Question
poolguy810, owner - pool and spa service company
Category: Pool and Spa
Satisfied Customers: 1675
Experience:  Servicing pools and all brands of spas for over 28 years.
Type Your Pool and Spa Question Here...
poolguy810 is online now
A new question is answered every 9 seconds

I just drained and refilled my Clearwater XS series spa...

Customer Question

I just drained and refilled my Clearwater XS series spa... Used a pre-filter and filled through the filter assembly, but when I powered it back up none of the pumps run (not even the circ pump). When I try to start them I can hear the relays clicking, but no pump start. It then gives the 'dR' error code. Water is cold (about 65F) so I am wondering if that is part of the issue?
I have reset the breaker a couple of times, but it hasn't helped. ANy ideas?
Submitted: 11 months ago.
Category: Pool and Spa
Expert:  Cole replied 11 months ago.

Hi there, I'm Cole. I see your asking about spas and i think i can help as i have over 10 years experience in this field.

Related Pool and Spa Questions