How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Fix my Pool and Spa Your Own Question
Fix my Pool and Spa
Fix my Pool and Spa, Owner / Technition
Category: Pool and Spa
Satisfied Customers: 1100
Experience:  Over 24 years in pool and spa service and construction
Type Your Pool and Spa Question Here...
Fix my Pool and Spa is online now
A new question is answered every 9 seconds

My Sundance spa gives the error: ----

Customer Question

My Sundance spa gives the error:
Submitted: 1 year ago.
Category: Pool and Spa
Expert:  Fix my Pool and Spa replied 1 year ago.

That is the watchdog error code this usually means one or both of the sensors are bad. I would replace both the High Limit and temp sensor as when one goes the other is not far behind. Open the control box under the spa and locate on the circuit board where the sensors plug into board, usually in the top right, follow the wires back and remove and replace both sensors, then turn breaker back on and see if watchdog went away.