How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Billy Your Own Question
Billy
Billy, Technician
Category: Pool and Spa
Satisfied Customers: 22627
Experience:  Licensed in Hydronics and Boilers
12672042
Type Your Pool and Spa Question Here...
Billy is online now
A new question is answered every 9 seconds

I'm trying to find out how to wire a Len Gordon ff1000tc, 4

Customer Question

I'm trying to find out how to wire a Len Gordon ff1000tc
JA: I'll do all I can to help. How long have you been dealing with this?
Customer: 4 days
JA: Do you plan on doing the work yourself?
Customer: Yes
JA: Anything else we should know to help you best?
Customer: No
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Pool Technician about your situation and then connect you two.
Submitted: 1 year ago.
Category: Pool and Spa
Expert:  Billy replied 1 year ago.

this control works on many types of systems...

120v...220v...2 speed pumps...single speed.....one pump...2 pumps and on...

What type of system do you have?

Customer: replied 1 year ago.
220 volt 2 speed 1 pump
Expert:  Billy replied 1 year ago.

thank you..so you have line 1 hot, line 2 hot and neutral coming in for power...and 2 wires from pump?

Expert:  Billy replied 1 year ago.

220v 1 speed pump wiring

Model FF-1094 - the jumper across terminals 4 & 5 will operate the pump continuously. If this is not desired, remove the jumper.