How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Billy Your Own Question
Billy
Billy, Technician
Category: Pool and Spa
Satisfied Customers: 22510
Experience:  Licensed in Hydronics and Boilers
12672042
Type Your Pool and Spa Question Here...
Billy is online now
A new question is answered every 9 seconds

I have a very old Dimension One Diamante hot tub. The low

Customer Question

I have a very old Dimension One Diamante hot tub. The low jets did not work but the high jets did work, so we bought and replaced the upper control panel. When we first put the new control panel on, the low jets worked for about 10 seconds and then went off and the heat light started blinking and the spa is not heating.
Submitted: 1 year ago.
Category: Pool and Spa
Customer: replied 1 year ago.
The high jets still work. When the high jets are on the red heat light stops blinking and is lit red.
Customer: replied 1 year ago.
now the next morning, the high jets will not turn off and the heater red light is still blinking.
Expert:  Billy replied 1 year ago.

I am very sorry your question has not been picked up yet.

I just logged on and found you had not been assisted.

Please let me know if you still need help and I will do my best. Please do not "Rate" as we have not worked toward an answer yet.

If you would like to proceed let me know by replying

Customer: replied 1 year ago.
please help me.
Expert:  Billy replied 1 year ago.

have you inspected the flow/pressure switch to make sure it is closed and staying closed when pump is running?

Customer: replied 1 year ago.
I am not sure how to check it, but I do have a new one ordered. Is there an easy way to check it???
Expert:  Billy replied 1 year ago.

the most reliable is with a voltmeter to check continuity...you could also bypass temporary to see if that is the issue.

Customer: replied 1 year ago.
We tried bypassing it several different times. It did not run properly when we bypassed it. The high jets will still not go off and the low jets will still not come on.
Customer: replied 1 year ago.
What else could it be besides the pressure switch?
Customer: replied 1 year ago.
The new pressure switch did not fix the problem. What else could it be?

Related Pool and Spa Questions