How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Pete Your Own Question
Pete, Electronic Engineer
Category: Pool and Spa
Satisfied Customers: 18113
Experience:  Over 16 years of experience installing and repairing electronics.
Type Your Pool and Spa Question Here...
Pete is online now
A new question is answered every 9 seconds

I just installed Jandy LED Ro474100 pool lights and not all

Customer Question

I just installed Jandy LED Ro474100 pool lights and not all the colors will come up when I select them and also none of the ones that cycle colors will work is there a setting or reset I need to do to make them all work?
Submitted: 1 year ago.
Category: Pool and Spa
Expert:  Pete replied 1 year ago.

Hi there,

There isn't any reset on these lights apart from turning the power off.

Check that the installation wiring is all correct first.

If it is, then there is likely a fault with the controller.

Expert:  Pete replied 1 year ago.

Hi, just checking in on your question, do you need any further assistance?