Pool and Spa
Questions about Pool Repair? Ask an Expert Online.
What equipment is this on?
A short circuit failure has occurred. Be sure that none of the wiring is nicked. Check the GFCI breaker to see if it has failed. Some of these pumps are very sensitive to changes in any electrical flow such as any surge or brown out. Have you turned system off then turned on again and then tried to clear error message by selecting the run/stop key at the same time? Also, if you have had rain in the area or high humidity sometimes the GFCI breakers will be compromised until they dry out. Any lightening?
I'm glad you were able to replace the board so quickly. That is usually the last thing we go to as it is one of the most expensive pieces. Thank you.