How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Billy Your Own Question
Billy, Technician
Category: Pool and Spa
Satisfied Customers: 22678
Experience:  Licensed in Hydronics and Boilers
Type Your Pool and Spa Question Here...
Billy is online now
A new question is answered every 9 seconds

Control flashes service. And. Air flow sw

Customer Question

Control flashes service. And. Air flow sw
Submitted: 1 year ago.
Category: Pool and Spa
Expert:  Billy replied 1 year ago.
I am very sorry your question has not been picked up yet.I just logged on and found you had not been assisted. Please let me know if you still need help and I will do my best. Please do not "Rate" as we have not worked toward an answer yet. If you would like to proceed let me know by replying. Once again use reply
Customer: replied 1 year ago.
Yeah. Let me know
Customer: replied 1 year ago.
Call me at(###) ###-#### No response yet from anyone. Should I just call pool installer
Expert:  Billy replied 1 year ago.
you may need the contractor for this. The combustion air switch is not closing...which means anything from a bad motor to a plugged vent pipe. Basically it is a safety that is saying it is not closed and holds off operation.If you want to try yourself I can direct towards a few things