How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Billy Your Own Question
Billy
Billy, Technician
Category: Pool and Spa
Satisfied Customers: 22515
Experience:  Licensed in Hydronics and Boilers
12672042
Type Your Pool and Spa Question Here...
Billy is online now
A new question is answered every 9 seconds

Steamist DSC 425-13bn control pad does not respond to start

Customer Question

Steamist DSC 425-13bn control pad does not respond to start unit
Submitted: 1 year ago.
Category: Pool and Spa
Expert:  Billy replied 1 year ago.

Hello,

to have a benchmark or starting point we need to know what voltage is being supplied to the control board. Then we can work from that point

Customer: replied 1 year ago.
It is approximately 8 years old. A dedicated circuit was installed that time. Whatever spec's are required.. There is power to it. It showed 1-60 secs scrolling on the pad under time
Expert:  Billy replied 1 year ago.

Thank you...do you have access to the molex connector coupling behind the panel that in turn runs to the generator?

Customer: replied 1 year ago.
I have turned off power.. I will see what it looks like
Expert:  Billy replied 1 year ago.

I apologize but I am not currently configured for phone contact. I will relist to the experts who are.

Billy

Customer: replied 1 year ago.
Did you want me to see what the connection looks like?

Related Pool and Spa Questions