How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Billy Your Own Question
Billy, Technician
Category: Pool and Spa
Satisfied Customers: 22634
Experience:  Licensed in Hydronics and Boilers
Type Your Pool and Spa Question Here...
Billy is online now
A new question is answered every 9 seconds

My 2010 artesian island spa displayed ohd on the panel today

Customer Question

My 2010 artesian island spa displayed ohd on the panel today and everything is on an running and will not turn off by control panel. Any suggestions? I had a new circuit board, heater assembly,& circulation pump installed one month ago and was running great until today.
Submitted: 1 year ago.
Category: Pool and Spa
Expert:  Billy replied 1 year ago.


It may be worth it to have the board installer back...check the sensor connections...shut down and check filter and make sure strong flow and jets open. This is a over heat code which can be loose/bad sensor, slow flow, stuck relay.