How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Billy Your Own Question
Billy, Technician
Category: Pool and Spa
Satisfied Customers: 22540
Experience:  Licensed in Hydronics and Boilers
Type Your Pool and Spa Question Here...
Billy is online now
A new question is answered every 9 seconds

Recently upgraded a rev G board using IQ20-RS iaqualink RS

Customer Question

recently upgraded a rev G board using IQ20-RS iaqualink RS 2.0. Everything worked great but never tested pool or spa heater until now. "spa heater" does not trigger the heater, however, pool heat does in fact turn the heater on. we only have one heater.
any clues?
Submitted: 1 year ago.
Category: Pool and Spa
Expert:  Billy replied 1 year ago.


before moving this a contractor upgrade or did you do this yourself?

Customer: replied 1 year ago.
I did it myself. I questioned if I plugged things in correctly but the pool and spa heating wires are all on the same "plug" if that makes sense.

Related Pool and Spa Questions