How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Billy Your Own Question
Billy, Technician
Category: Pool and Spa
Satisfied Customers: 22625
Experience:  Licensed in Hydronics and Boilers
Type Your Pool and Spa Question Here...
Billy is online now
A new question is answered every 9 seconds

I have a Hot Springs Jetsetter spa and the on-board relay #1

Customer Question

I have a Hot Springs Jetsetter spa and the on-board relay for pump #1 on the iq2020 motherboard is defective. the iq2020 board has a "hookup" for a #2 pump which is unused and has a (I think) relay in the circuit. Is there a way to "activate" the #2 pump relay in a 110 volt configuration. I was hoping I could move some jumpers and begin using the pump #2 terminals rather that the pump #1 terminals with the bad relay. I have ordered another relay but would rather not have to pull the board and and chance ruining it trying to desolder the bad relay. Thanks!
Submitted: 1 year ago.
Category: Pool and Spa
Expert:  Billy replied 1 year ago.


what unit are you running these controls in?