How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Billy Your Own Question
Billy
Billy, Technician
Category: Pool and Spa
Satisfied Customers: 22514
Experience:  Licensed in Hydronics and Boilers
12672042
Type Your Pool and Spa Question Here...
Billy is online now
A new question is answered every 9 seconds

I have a thermospa Concord model and just cleaned it and

Customer Question

I have a thermospa Concord model and just cleaned it and fired it up. Pumps circulate water but I get SnS code alternating with the temperature - Can I trouble shoot?
Submitted: 1 year ago.
Category: Pool and Spa
Expert:  Billy replied 1 year ago.

hello this will be a sensor issue. If you have a meter and can perform resistance check on the sensor you can determine ohms. Then we can tell you if good or bad. A;so what temperature the sensor is when you test it

Related Pool and Spa Questions