How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Billy Your Own Question
Billy, Technician
Category: Pool and Spa
Satisfied Customers: 22679
Experience:  Licensed in Hydronics and Boilers
Type Your Pool and Spa Question Here...
Billy is online now
A new question is answered every 9 seconds

I was running the clean cycle and t the jet button and all

Customer Question

I was running the clean cycle and hit the jet button and all the power went off. Not my outside or inside breakers and cycled them both. Is there an internal fuse in the Vanguard?
Thanks for any help you can give me. Patrick
Submitted: 2 years ago.
Category: Pool and Spa
Expert:  Billy replied 2 years ago.


can you please tell us what series or model number the unit is? Then we can be more specific

Customer: replied 2 years ago.
2003 Hotsprings Vangard 400 gal
Expert:  Billy replied 2 years ago.

have you checked the gfci plug to see if it tripped?

Customer: replied 2 years ago.
I checked the pump and heater ones that are in a covered case outside and the CB in the basement. Cycled them all. I was just wondering if there is an internal fuse since everything is stopped dead.
Expert:  Billy replied 2 years ago.

do you have a voltmeter to test a few things for me?