How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Billy Your Own Question
Billy, Technician
Category: Pool and Spa
Satisfied Customers: 22682
Experience:  Licensed in Hydronics and Boilers
Type Your Pool and Spa Question Here...
Billy is online now
A new question is answered every 9 seconds

I have a 97 Corum Sundance hot tub.....pump 1 an 2 an the

Customer Question

I have a 97 Corum Sundance hot tub.....pump 1 an 2 an the blower are not responding on my key pad .......temperature an light are the only working.....I have 220 volts going to panel.....replaced buss fuse.....I do not no what to check next ....
Submitted: 2 years ago.
Category: Pool and Spa
Expert:  Billy replied 2 years ago.

you have power going to panel but does power leave board and go to pumps?

Customer: replied 2 years ago.
Im not sure how to check power from panel to the pumps .....pump one comes on when the temperature drops ....its kicks on when heater is when it gets to 104 it kicks off .....when I push pump 1 or pump 2 or blower , there is no responce ...
Expert:  Billy replied 2 years ago.

Thank you..that explained it. You have a bad board...the board that the pumps wire to is defective.

Customer: replied 2 years ago.
Can you tell me specifically the name of what I need to order a general amount of it ....
An where the best place to order it ....
Is this something I can change myself with your assistance????