How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Billy Your Own Question
Billy, Technician
Category: Pool and Spa
Satisfied Customers: 22541
Experience:  Licensed in Hydronics and Boilers
Type Your Pool and Spa Question Here...
Billy is online now
A new question is answered every 9 seconds

Looking help with connecting a mini max 400 to a Jandy PDA.

Customer Question

Hi looking for some help with connecting a mini max 400 to a Jandy PDA . The heater in about 16 years old ... Not sure if I connect to one of the 120v relays of if there is a better option. Thank you for your help
Submitted: 1 year ago.
Category: Pool and Spa
Expert:  Billy replied 1 year ago.


are you planning on using a set of dry contacts for on/off use only?

Customer: replied 1 year ago.
Not sure I was just looking for the best way to connect this heater to the power center - whether there where dry contacts if if . Where whould the conception be on the heater. Or should just interrupt the power to the heater using one of the power center relays. Leaving the heater swich to on spa and temp maxed . Thanks
Customer: replied 1 year ago.
Conception should be connection. In the above. I hate auto correct