How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Billy Your Own Question
Billy
Billy, Technician
Category: Pool and Spa
Satisfied Customers: 22541
Experience:  Licensed in Hydronics and Boilers
12672042
Type Your Pool and Spa Question Here...
Billy is online now
A new question is answered every 9 seconds

2004 Caldera Niagra. Power is good to the circuit board. Spa

Customer Question

2004 Caldera Niagra. Power is good to the circuit board. Spa is not functioning and no display topside.
Submitted: 2 years ago.
Category: Pool and Spa
Expert:  Billy replied 2 years ago.
Hello,
on lower board is there a blown fuse?
or do you have a meter to see if power is being delivered to top controller?
Customer: replied 1 year ago.
Aug 23 at 3:09 PMThe one and only fuse is good. There is 240 volt power to the circuit board. (checked with meter) I have disconnected the controller and the auxiliary controller, turn the power back with no response from any motors or hot tub functions There is no lights on the circuit board that indicate a problem or controller disconnect. When connected the controller has no lights or function. Bot***** *****ne - Power is getting to the main board but all functions are dead.
Expert:  Billy replied 1 year ago.

if power is direct to board....and fuse is ok...then you have a compromised circuit board. Have you checked the back of the board for hot spots or melt failures?

Customer: replied 1 year ago.
the back of the board looks normal