How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Billy Your Own Question
Billy, Technician
Category: Pool and Spa
Satisfied Customers: 22626
Experience:  Licensed in Hydronics and Boilers
Type Your Pool and Spa Question Here...
Billy is online now
A new question is answered every 9 seconds

We have a Jandy Pool-Spa with Chemical Feeder system and

Customer Question

We have a Jandy Pool-Spa with Chemical Feeder system and operated with a remote control from Jandy, the J.Box is just next to the pump-file. We just replaced the water fall and had to empty and then fill up manually after the repair was complete.
e just had a power shuut-off due a thunderstorm and since then when we try to start the pool the valving seem to be screwed up because in AUTO it drains the Spa and when we put in Service (pump-filter on+ spa drain on) the water fall do not work and the pump seems to be running but no water circulation is noticed through the strainer-basket.
What do you suggest we should do ??
Will appreciate your help.
Submitted: 2 years ago.
Category: Pool and Spa
Expert:  Billy replied 2 years ago.
when you did the service was any of the work electrical or was the repair only mechanical in nature?
use reply