How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Fix my Pool and Spa Your Own Question
Fix my Pool and Spa
Fix my Pool and Spa, Owner / Technition
Category: Pool and Spa
Satisfied Customers: 1088
Experience:  Over 24 years in pool and spa service and construction
Type Your Pool and Spa Question Here...
Fix my Pool and Spa is online now
A new question is answered every 9 seconds

Is there a reset on the gh limit or the heater on an 08

Customer Question

Is there a reset on the high limit or the heater on an 08 chelsee? My temp sensor went bad I changed it, I looked at high limit all the way to the board nothing to reset, so I searched around on the heater and I can't find anything/
Submitted: 1 year ago.
Category: Pool and Spa
Customer: replied 1 year ago.
I noticed the clock stopped counting and its been more than 8 min what next?
Expert:  Fix my Pool and Spa replied 1 year ago.

There is no rest on the sensors. If your topside control is displaying a Sn code then you need to replace both sensors the high limit and thermostat. Make sure you leave the breaker off for one complete hour before resetting breaker then let spa boot back up after the high limit is replaced and you should be good.

Related Pool and Spa Questions