How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Billy Your Own Question
Billy
Billy, Technician
Category: Pool and Spa
Satisfied Customers: 22682
Experience:  Licensed in Hydronics and Boilers
12672042
Type Your Pool and Spa Question Here...
Billy is online now
A new question is answered every 9 seconds

I have a Cal Spa Diamond series I just purchased used. The

Customer Question

I have a Cal Spa Diamond series I just purchased used. The seller seemed to be a very nice and honest man said everything worked. When I got it home, I hooked it up and it does not work. There is no power at all. When we meter the power at the board, it has power there. Its just nothing is coming on. I have looked for some sort of reset button but do not see any kind of switch. my fear is the circuit board is bad and the honest man lied.
Submitted: 2 years ago.
Category: Pool and Spa
Customer: replied 2 years ago.
I want to know if there is some sort of reset button or something else I need to check. What else could it be?
Customer: replied 2 years ago.
I checked the curcit board and I am getting 120v from the red and the black.
Expert:  Billy replied 2 years ago.
Hello,
is this a 120v or 240 v unit
use reply and let me know
Customer: replied 2 years ago.
240. I measured 120 from the red and 120 from the white
Customer: replied 2 years ago.
Sorry I mean 120 on red and 120 on black.
Expert:  Billy replied 2 years ago.
Did you measure red wire to black wire?
Customer: replied 2 years ago.
Expert:  Billy replied 2 years ago.
Ok I am a little confused..
you had 120 on red
120 on white
120 on black
and 240 red to black?
Customer: replied 2 years ago.
No.. red and white....120....black and white 120.