How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Billy Your Own Question
Billy, Technician
Category: Pool and Spa
Satisfied Customers: 22623
Experience:  Licensed in Hydronics and Boilers
Type Your Pool and Spa Question Here...
Billy is online now
A new question is answered every 9 seconds

I purchased the Hawkeye Jupiter spa two years ago, but went

Customer Question

I purchased the Hawkeye Jupiter spa two years ago, but went in for surgery, so it never was installed. I just installed it two days ago and both pumps worked OK. Yesterday and today, only pump 1 works. If I power it down then power up the following appears on the screen:
And nothing works unless I change the temp.
No MODE select either.
Can you help??
Submitted: 2 years ago.
Category: Pool and Spa
Expert:  Billy replied 2 years ago.
an issue like this gets more involved than a basic answer.
Do you have a volt meter capable of ac volts and resistance (ohms)?
Use reply to proceed