How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Billy Your Own Question
Billy, Technician
Category: Pool and Spa
Satisfied Customers: 22678
Experience:  Licensed in Hydronics and Boilers
Type Your Pool and Spa Question Here...
Billy is online now
A new question is answered every 9 seconds

I have a Jandy 1400 Salt System and was getting error

Customer Question

Hello, I have a Jandy 1400 Salt System and was getting error code 172 2 days ago so I replaced the flow sensor and cleaned the cell and the system worked for a day. Now I am getting error 180 which states: Heated sensor element not heating. Can anyone tell me is this caused by the cell or the board or ??? Any ideas?
Submitted: 2 years ago.
Category: Pool and Spa
Expert:  Billy replied 2 years ago.
push the R-temp and salinity buttons (w sensor disconnected) while pushing salinity button on front, the chlorine production setting should be displayed then push the other button combinations, If you do not get temp readouts indicated, but still the chlorine production setting readout. you have a bad board.