How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Billy Your Own Question
Billy, Technician
Category: Pool and Spa
Satisfied Customers: 22519
Experience:  Licensed in Hydronics and Boilers
Type Your Pool and Spa Question Here...
Billy is online now
A new question is answered every 9 seconds

We began setting our above ground pool up with a "table Top'

Customer Question

we began setting our above ground pool up with a "table Top' surface. somewhere in the set up we got uneven on one side. it is 14'x38". It is uneven by about 2 or 3 this going to be a prooblem
Submitted: 2 years ago.
Category: Pool and Spa
Expert:  Billy replied 2 years ago.
When you say uneven on one it the 14' end to end uneven....or the 38" side to side?
use reply

Related Pool and Spa Questions