How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Billy Your Own Question
Billy, Technician
Category: Pool and Spa
Satisfied Customers: 22623
Experience:  Licensed in Hydronics and Boilers
Type Your Pool and Spa Question Here...
Billy is online now
A new question is answered every 9 seconds

I snapped off the 90 degree elbow that drains the filter. Part

Customer Question

I snapped off the 90 degree elbow that drains the filter. Part of it is up in there and there is no headroom to drill it out from the bottom. How do I remove the gray, plastic fitting from the top, with the filter screen in it. Is it right or left hand thread? OR will it even come out. It's the fitting that the filter screws in to.
Submitted: 2 years ago.
Category: Pool and Spa
Expert:  Billy replied 2 years ago.
I do not know on this exact one as far removing...but I do know that some require being cut out and refitted with pvc.
Some even are relocated...
Use reply for further info
Customer: replied 2 years ago.
That's a joke, right?