How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Billy Your Own Question
Billy, Technician
Category: Pool and Spa
Satisfied Customers: 22636
Experience:  Licensed in Hydronics and Boilers
Type Your Pool and Spa Question Here...
Billy is online now
A new question is answered every 9 seconds

I have a prowler 720 where the track don't drive. I have 28

Customer Question

I have a prowler 720 where the track don't drive. I have 28 volts coming out of the transformer for the suction pump. Is the track motor suppose to be the same voltage because there is only approx. 100 mil volts going to it form the other two pins.
Submitted: 2 years ago.
Category: Pool and Spa
Expert:  Billy replied 2 years ago.
The pump motor is 24v dc current. If you have no 24v then the issue is likely in the wire harness or connections.