How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Machinc Your Own Question
Machinc, General Contractor
Category: Pool and Spa
Satisfied Customers: 921
Experience:  Has written home improvement articles since 2008. Earned South Carolina Residential Builders License in 1991.
Type Your Pool and Spa Question Here...
Machinc is online now
A new question is answered every 9 seconds

My intellichlor 40 is new this season. I am trying to adjust

Customer Question

My intellichlor 40 is new this season. I am trying to adjust my the chlorine output. Pressing the "more" and "less" button doesn't move the light bar. If I hold down the button the bar will move will return to 60%. No help from owners manual.
Submitted: 2 years ago.
Category: Pool and Spa
Expert:  Machinc replied 2 years ago.
With the easy touch or suntouch systems the more or less buttons are
disabled and cannot be used.
There are other causes but wanted
to check that you know this to eliminate this
I will be glad to answer any questions you may have
Customer: replied 2 years ago.
The Intellichlor 40 was installed by my pool contractor. Certainly sounds like the buttons are disabled but not sure how to check.
Expert:  Machinc replied 2 years ago.
If you have "Easy touch " Intellitouch " or "Sun touch"
controls they would be disabled.
If not then you would need to
contact your pool installer