How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Billy Your Own Question
Billy, Technician
Category: Pool and Spa
Satisfied Customers: 22541
Experience:  Licensed in Hydronics and Boilers
Type Your Pool and Spa Question Here...
Billy is online now
A new question is answered every 9 seconds

I have a jandy aqua link rs that is 4 years old it controls

Customer Question

Hi I have a jandy aqua link rs that is 4 years old it controls my spa and my pool(they are two separate bodies of water) I have a jandy one touch that is hard wired in my house. The screen on the one touch does not light up so I went to the command center in service mode everything turns on (spa and heater/ pool and heater/ lights for both the spa and the pool. When I put the command center in auto mode everything turns on except the actual spa pump and pool pump. I want to get a wireless system and bypass the one touch but I still can't figure out why the pool and spa pump don't turn on in the auto mode
Submitted: 2 years ago.
Category: Pool and Spa
Expert:  Billy replied 2 years ago.
This will involve the schematic, a meter and some patience.

are you willing to get a bit invasive and do you have a reliable meter

Use reply