How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Billy Your Own Question
Billy
Billy, Technician
Category: Pool and Spa
Satisfied Customers: 22510
Experience:  Licensed in Hydronics and Boilers
12672042
Type Your Pool and Spa Question Here...
Billy is online now
A new question is answered every 9 seconds

Kinda frustrated - have an older 355 jacuzzi hot tub - drain

Customer Question

hello- kinda frustrated - have an older 355 jacuzzi hot tub - drained and replaced circ pump as it was making a loud pulsing noise, pump was still secure and not rubbing on anything -refilled by putting garden hose in port below filter,and turned back on when filled up to bottom of pillows - no circ pump -error code FLO tried with out filters, no good - checked for blockage at circ filter - okay -took back off pump looking for reset [ power off of course ] then turned power on and saw blinking green light - used a magnet at flow switch, moved contacts , heater comes on - shut off at breaker, click sound when turned back on but no circ pump - fuses look okay - tried forcing water backwards thru water fall and circ filter port thinking air lock - no pump - did my best moon walk across the back yard while swinging a rubber chicken nothing works
Submitted: 2 years ago.
Category: Pool and Spa
Expert:  Billy replied 2 years ago.
Hello,
is the pump running correct rotation?
If so...fill tub..start pump 20 seconds...off 20 sec...on 20...do that 6 times and let me know if it primes.
Use reply

Related Pool and Spa Questions