How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask GM Tech (Cam) Your Own Question
GM Tech (Cam)
GM Tech (Cam), Pontiac Technician
Category: Pontiac
Satisfied Customers: 2376
Experience:  GM Grand Master Technician 2007. 14 years experience.
Type Your Pontiac Question Here...
GM Tech (Cam) is online now
A new question is answered every 9 seconds

I am trying to get codes from the dang thing. there is no

Customer Question

I am trying to get codes from the dang thing. there is no wire on the B terminal in the adl there is one in the a terminal
JA: Just to clarify, what's the exact code? And have you tried to reset it?
Customer: i have a code but cannot retrieve it have tried 2 scaners and even the old paper clip between a and b terminals the is no wire in the b terminal to jump to
JA: What is the model/year of your Pontiac?
Customer: 1994 pont trans sport 3.8 'l
JA: Are you fixing your Trans Sport yourself? What have you tried so far?
Customer: plugs wires o2 sensor
JA: Anything else you want the mechanic to know before I connect you?
Customer: how to get a code on this modle :L: is 8th diget
Submitted: 8 months ago.
Category: Pontiac
Expert:  George H. replied 8 months ago.

Hello I will help,

Do you still need help with this? I just saw your question.

This was built in the transition years from OBD 1 to OBD2

How many pin cavities do you have on the connector? 12 or 16?

What is the wire color in the "A" hole that you can see?