How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask GM Tech (Cam) Your Own Question
GM Tech (Cam)
GM Tech (Cam), Pontiac Technician
Category: Pontiac
Satisfied Customers: 2378
Experience:  GM Grand Master Technician 2007. 14 years experience.
Type Your Pontiac Question Here...
GM Tech (Cam) is online now
A new question is answered every 9 seconds

Key got stuck in ignition. Was able to get it out, however

Customer Question

Key got stuck in ignition. Was able to get it out, however ignition lock cylinder would not turn. Drilled it out and replaced with new gm ignition cylinder set to my original key. While getting initial ignition cylinder out I accidently drilled into ignition switch. Went to Junk yard and replaced ignition switch. New ignition cylinder won't turn all the way off without pressing the unlock button, under the steering column. Biggest problem, when I go to start car, I hear a weird noise, almost like a bad solenoid, car starts to chime, then warning lights cycle, low brake fluid, low washer fluid, awd, security, they all cycle until I turn car off. Try to start car again and same scenario happens. ???
Submitted: 1 year ago.
Category: Pontiac
Expert:  Chris (aka- Moose) replied 1 year ago.

Welcome, I'm Chris (aka Moose) I prefer to work when others don't, I am here around lunch and after dinner till after midnight.

  • Sorry no one has helped yet.
  • This is not an answer to your question, just an inquiry if your still needing/wanting help. Because I believe I can help.
Customer: replied 1 year ago.
Taking it to dealership, won't need any help!
Expert:  Chris (aka- Moose) replied 1 year ago.

Glad your getting it resolved