Pontiac Problems? Ask a Mechanic for Answers ASAP
there are only 3 bolts holding the hub and the axle bolt... do you have the rotor off?
does the hub have a accees notch
no to snake in a stud... most have a notch
ive cheated in a pinch and ground some of the stud base flat below the nurl to snake it it... other then that its unbolt the hub to gain access
at the head so its easier to snake it in.. or if there are shorter studs available that works also..but the parts guy will need to match up the knurl//splines
Please remember to only rate my service when you are satisfied. IF you feel the need to rate "Poor Service" or "Bad Service", please stop and reply to me via the REPLY TO EXPERT button with the issue you have. I will be happy to continue further and do everything I can to provide you with the service you seek.I am not paid unless I get a rating of 3 to 5 Stars/Smiley Faces. As always I'm happy to provide my time/service & resources so If I have helped you with your question, please give me an appropriate rating so that I get credit for helping you. Thank you and good luck with your vehicle!