How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask HDGENE Your Own Question
HDGENE, ASE Certified Technician
Category: Pontiac
Satisfied Customers: 5568
Experience:  25 years experience,ASE Master Tech.Certified in mulitple car lines
Type Your Pontiac Question Here...
HDGENE is online now
A new question is answered every 9 seconds

Have new blend door actuator does not line up with door 1999

Customer Question

have new blend door actuator does not line up with door 1999 gtp dual climate
JA: Are you hoping to fix this yourself? What have you tried so far?
Customer: I have actuator in my hand,it does line with the blend door
JA: Anything else you think the mechanic should know?
Customer: i have the old actuator in my do i line the door and the actuator up with each other.the motor doesn't turn and the door doesn't turn enought
JA: How many miles are on the car? Is it an automatic or a manual transmission?
Customer: 200,000 automatic trans dual climate ac
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Pontiac Mechanic about your situation and then connect you two.
Submitted: 1 year ago.
Category: Pontiac
Expert:  HDGENE replied 1 year ago.

Hello, if you plug in the door actuator and turn the selector switch it will turn the actuator. Assuming you have the correct actuator to install in the given position you are looking to replace.