How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Gary Your Own Question
Gary, Pontiac Technician
Category: Pontiac
Satisfied Customers: 16769
Experience:  15 years GM master tech/15 years ASE master
Type Your Pontiac Question Here...
Gary is online now
A new question is answered every 9 seconds

Pete I was wondering what the oil pan bolt size is on a 2004

Customer Question

hello Pete I was wondering what the oil pan bolt size is on a 2004 Pontiac Bonneville 3 8 v 6 SLE
Submitted: 1 year ago.
Category: Pontiac
Customer: replied 1 year ago.
do slotted and drilled rotors actually make a difference I Drive my car very frequently at least a hundred miles a day just for work normally at 70 or 75 miles an hour I have had some problems with warping of the rotorsjust curious as to if they would actually make a difference
Expert:  Gary replied 1 year ago.

I am sorry for the long wait

the drilled or slotted rotors will help dissipate heat better than the stock rotors which will greatly help in the rotors building up too much head to cause rotor warping

the oil pan bolt head size should be 10 MILL uses 6 point sockets on then

if by chance someone changed them out we have seen a few 3/8 heads on them again using a 6 point socket